Combo 10 & 30 Hour

229

209


OSHA 10 & 30-hour Construction Training Package

 This course contains the content from both the 10-hour & 30-hour courses.

Construction crew

 

Description Course Description

OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the courses, participants will receive OSHA Construction Outreach DOL course completion cards within 2 weeks.

Regulatory Regulatory

Please refer to the state/regulatory requirement in the course catalog page.

Pre-requisites Course Pre-Requisite

There are no pre-requisite requirements for these courses.

Objectives Learning Objectives

10-hour Construction: 30-hour Construction:
  • State the purpose of the OSH Act and list the functions of OSHA
  • List the OSHA inspection priorities and describe the inspection process
  • The basic requirements for proper aisle and passageway maintenance
  • Guidelines for identification and protection of floor opening
  • To understand the importance of effective egress fire protection program
  • Locate OSHA Standards references applicable to specific hazardous conditions and practices (Introduction to OSHA Standards)
  • Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions)
  • Implement preventative measures for accidents in their workplace (Subpart D- Occupational health and Environmental Controls)
  • Describe types of personal protective equipment (PPE), and the requirements for use in OSHA standards (Subpart E- Personal Protective Equipment)
  • Understand the requirements for fire protection in the workplace (Subpart F- Fire Protection and Prevention)
  • Identify types of rigging equipment used to protect employees (Subpart H- Rigging; Subpart N- Cranes and Rigging)
  • Identify the critical health and safety hazards of welding and cutting in the construction industry (Subpart J- Welding and Cutting)
  • Identify common electrical hazards and related OSHA standards (Subpart K- Electrical Standards)
  • Understand the importance of scaffolding for workers in elevated workplaces (Subpart L- Scaffolding)
  • Implement measures for protecting workers and equipment from dangerous falls (Subpart M- Fall Protection)
  • Recognize the hazards associated with working in or around excavation sites (Subpart P- Excavations)
  • Understand the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q- Concrete and Masonry)
  • Identify the precautions and hazards to protect workers using explosives or blasting agents (Subpart T- Demolition)
  • Protect workers who perform jobs on or around stairways or ladders at worksites (Subpart X - Stairways and Ladders)
  • List and describe the hazards and prevalence of confined spaces

Topics Topics Covered

10-hour Construction: 30-hour Construction:
  • Orientation
  • Introduction
  • Labels and SDS
  • Module 1: Introduction to OSHA
  • Module 2: OSHA Focus Four Hazards
  • Module 3: Personal Protective Equipment
  • Module 4: Health Hazards in Construction
  • Module 5: Cranes, Derricks, Hoists, Elevators and Conveyors
  • Module 6: Stairways and Ladders
  • Module 7: Lead Exposure
  • Module 8: Asbestos Exposure
  • Orientation
  • Introduction
  • Labels and SDS
  • Module 1: Introduction to OSHA
  • Module 2: Managing Safety and Health
  • Module 3: OSHA Focus Four Hazards
  • Module 4: Personal Protective Equipment
  • Module 5: Health Hazards in Construction
  • Module 6: Stairways and Ladders
  • Module 7: Concrete and Masonry Construction
  • Module 8: Confined Spaces
  • Module 9: Cranes, Derricks, Hoists, Elevators and Conveyors
  • Module 10: Ergonomics
  • Module 11: Excavations
  • Module 12: Fire Protection and Prevention
  • Module 13: Materials Handling, Use and Disposal
  • Module 14: Motor Vehicles, Mechanized Equipment and Marine Operations; Rollover Protective Structures and Overhead Protection; and Signs, Signals and Barricades
  • Module 15: Safety and Health Programs
  • Module 16: Scaffolds
  • Module 17: Tools - Hand and Power
  • Module 18: Welding and Cutting
  • Module 19: Silica Exposure
  • Module 20: Lead Exposure
  • Module 21: Asbestos Exposure

Seat Time Seat Time

These courses have been approved for 10 or 30 hours, as appropriate.

Time to Completion Time to Completion

Once you enroll in the OSHA Construction Outreach Training courses you will have 6 months to successfully complete the course. If you do not complete the courses in 6 months you will not receive a certificate for course completion.

Testing Testing

All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.

A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will receive an OSHA Construction Outreach DOL course completion card within 2 weeks. Laminated cards now available!

In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course. OSHA REQUIRES THAT THE END OF COURSE SURVEY BE SUBMITTED WITHIN 3 MONTHS OF COURSE COMPLETION OR A DOL CARD WILL NOT BE ISSUED.

229

209

OSHA 10 & 30-hour Construction Training Package

229

209

Register now!