This course includes the Plastic
Official DOL Card.
Upon completion of the course, You will get your plastic official Department of Labor (DOL) card in the mail within 2 weeks.
Jason Cole is our OSHA outreach instructor. He has been an OSHA-authorized trainer for Construction and General Industry since 2007.
OSHA 10-Hour General Industry Training Course
360training.com, Inc. is accredited by the International Accreditors for Continuing Education and Training (IACET) and offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. IACET is recognized internationally as a standard development organization and accrediting body that promotes quality of continuing education and training.
The OSHA 10-hour General Industry Outreach Training course has been reviewed and authorized by OSHA for online distribution. OSHA 10-Horas Curso en Español Para Industría General
SAVE with OSHA.com! For a limited time, our OSHA Outreach 10-hour General Industry Training Course is on sale! Sale ends June 30.
The 10-hour General Industry Outreach Training Program is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting.
OSHA.com recommends Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will be mailed an OSHA 10-Hour General Industry DOL Wallet Card within 1-2 weeks.
What is OSHA 10 General Industry Training?
The term "general industry" refers to workplaces that are not in agricultural, construction, or maritime yet are subject to OSHA regulations. Training aims to educate workers on OSHA requirements, common workplace safety hazards and help workers receive their OSHA 10 card. Some businesses may require employees to attend an OSHA 10 General Industry course before starting employment.
OSHA 10 General Industry Training is designed to help employees in various industries, including healthcare, factory operations, warehousing, manufacturing, and storage, meet their workplace training requirements. Enrolling in and completing OSHA 10 General Industry Training educates workers on preventing, identifying, and stopping common workplace hazards.
An OSHA 10 Card does not expire. However, your company or employer may require that you take a refresher course every three to five years to stay updated on OSHA safety rules. Some businesses may refuse to recognize your OSHA card if it was issued more than five years ago. If you are an OSHA 10 card holder be sure to stay on top of retraining.
Who is This Course For?
- Entry Level General Industry Workers
- Industries include but not limited to: Health Care, Manufacturing, Warehousing, Distribution, Retail
- Labels and SDS
- Module 1: Introduction to OSHA
- Module 2: Walking & Working Surfaces, including Fall Protection
- Module 3: Exit Routes, Emergency Action Plans, Fire Prevention Plans and Fire Protection
- Module 4: Electrical
- Module 5: Personal Protective Equipment
- Module 6: Hazard Communication
- Module 7: Machine Guarding Safety
- Module 8: Ergonomics
- Module 9: Recordkeeping & Reporting
- Module 10: Hazwoper
At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz. Failure to successfully pass the quiz will result in being locked out of the course and not allowed to continue with an online training format for your Outreach training.
Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course. You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course will no longer be able to take your Outreach training in an online format.
Time to Completion
Once you enroll in the OSHA 10-hour General Industry Outreach Training course you have six months from the time you start this course to complete it in order to receive credit. After six months, your account will expire and you will be required to purchase the course again if you wish to complete it.
A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will receive a DOL General Industry Outreach course completion wallet card within 2 weeks.
In order to receive your DOL Wallet Card you must complete the survey at the end of the course.
Includes free OSHA 10 Hour General Industry Study Guide! This PDF Study Guide will ensure you are ready to take the final exam to receive your wallet card. This is a great supplement to the OSHA 10 Hour General Industry Outreach Course and can serve as a quick reference guide for future use.